Sony HT DDW1600 - Manual (Page 78)

78 GB
Inputs
Analog Sensitivity: 800 mV/50
kohms
Digital (Coaxial) Impedance: 75 ohms
Outputs (Analog)
AUDIO OUT Voltage: 800 mV/10
kohms
SUB WOOFER Voltage: 2 V/1 kohm
Tone
Gain levels ±6 dB, 1 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code SP, AU, TH
With 9-kHz tuning scale:
531 – 1,602 kHz
Models of area code E51
With 10-kHz tuning scale:
530 – 1,610 kHz
4)
With 9-kHz tuning scale:
531 – 1,602 kHz
4)
Models of area code MX, AR
With 10-kHz tuning scale:
530 – 1,610 kHz
Antenna Loop antenna
Intermediate frequency
450 kHz
4)
You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down TUNING
MODE, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
80 MHz HD Pass Through
General
Power requirements
Power output (DIGITAL MEDIA PORT)
(Models of area code SP, AU, TH only)
DC OUT: 5V, 700 mA
Power consumption 200 W
Power consumption (during standby mode)
0.3 W
Dimensions (width/height/depth) (Approx.)
430 Ч 157.5 Ч 316 mm
including projecting parts
and controls
Mass (Approx.) 8.0 kg
Speaker section
• Front speakers (SS-MSP16)
Speaker system 2-way, 3 unit, magnetically
shielded
Speaker units
Woofer:
160 mm, cone type × 2
Tweeter: 25 mm, horn type
Enclosure type Bass reflex
Rated Impedance 4 ohms
Dimensions (width/height/depth) (Approx.)
250 Ч 950 Ч 274 mm
Mass (Approx.) 14.1 kg
Area code Power requirements
SP, TH 230 – 240 V AC,
50/60 Hz
AU 240 V AC, 50 Hz
MX 127 V AC, 60 Hz
E51 120/220/240 V AC,
50/60 Hz
AR 220 – 230 V AC, 50/60 Hz