Sony HT DDW1600 - Manual (Page 79)

79 GB
Ad
dit
ion
al I
n
fo
rmatio
n
• Center speaker (SS-CNP16)
Speaker system 2-way, 3 unit, magnetically
shielded
Speaker units
Woofer:
100 mm, cone type × 2
Tweeter: 25 mm, horn type
Enclosure type Bass reflex
Rated Impedance 4 ohms
Dimensions (width/height/depth) (Approx.)
514 Ч 174 Ч 223 mm
Mass (Approx.) 4.9 kg
• Surround/Surround back speakers
(SS-SRP16)
Speaker system Full range
Speaker units
Woofer:
100 mm, cone type
Enclosure type Bass reflex
Rated Impedance 4 ohms
Dimensions (width/height/depth) (Approx.)
171 Ч 216 Ч 163 mm
Mass (Approx.) 1.5 kg
• Sub woofers (SA-WP16)
Speaker system Active sub woofer,
magnetically shielded
Speaker unit 250 mm cone type
Enclosure type Acoustically loaded bass
reflex
RMS output 200 W
5)
175 W
6)
Input LINE IN (input pin jacks)
5)
Measured under the following conditions:
6)
Measured under the following conditions:
Power requirements
Power consumption 80 W
Dimensions (width/height/depth) (Approx.)
335 Ч 410 Ч 412 mm
including front panel
Mass (Approx.) 10.6 kg
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Surround back speaker (1)
Sub woofers (2)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Speaker cord (long) (3)
Speaker cord (short) (3)
Monaural audio cord (2)
Coaxial digital cord (1)
Foot pad (speakers) (16)
Foot pad (sub woofers) (8)
Optimizer microphone (ECM-AC2 or
ECM-AC2a) (1)
Remote commander RM-AAU013
(Models of area code MX, E51, AR only) (1)
Remote commander RM-AAU015
(Models of area code SP, AU, TH only) (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to
change without notice.
Area code Power requirements
AU, E51, SP, TH 240 V AC, 50 Hz
MX 127 V AC, 60 Hz
AR 230 V AC, 50 Hz
Area code Power requirements
AR 220 V AC, 50 Hz
Area code Power requirements
SP, TH 230 – 240 V AC,
50/60 Hz
AU 240 V AC, 50 Hz
MX 127 V AC, 60 Hz
E51 120/220/240 V AC,
50/60 Hz
AR 220 – 230 V AC, 50/60 Hz
For details on the area code of the
component you are using, see page 3.