Sharp XG-V10XU - Manual (Page 34)

E-33
Operation Buttons
1.2.3 4.5.6
3
2
1
3
Magnifying a Specific Portion of an Image
s
On-screen Display
Projector
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position)
1 Press ENLARGE. Each time ENLARGE is
pressed, the image will be magnified.
2 When the image is magnified, you can pan and
scan around the image by using ∂/ƒ/ß/©.
• ENLARGE does not work with UXGA signal image.
• Each time ENLARGE is pressed, image
magnification
toggles as shown below.
؂1 ؂4 ؂9 ؂16 ؂36 ؂64
• If the input signal is changed during digital image
magnification, the image will return to
ן1. The input signal
is changed
(a) when INPUT 1.2.3 or INPUT 4.5.6 is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.
3 To return to ן 1, press UNDO.
Remote Control
MOUSE ADJ.
ן4