Sharp XG-V10XU - Manual (Page 41)

E-40
Basic Operation
Basic Operations
Projector
Using the GUI (Graphical User Interface) Menu Screen
(GUI) On-screen Display
1
INPUT 1, 2 (RGB) or 3 (DIGITAL) mode
1
INPUT 4, 5 (VIDEO) mode
4 (Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU to display the INPUT 1, 2, 3, 4 or 5
mode menu bar.
2 Press ß/© to select an adjustment menu on the
menu bar.
3 Press ∂/ƒ to select a specific adjustment item.
4 To display a single adjustment item, press ENTER
after selecting the item. Only the menu bar and
the selected adjustment item will appear.
5 Press ß/© to adjust the item.
6 Press UNDO to return to the previous screen.
7 To exit from the GUI, press MENU.
• For details on items on the menu screen, see the tree charts
on pages 41 and 42.
Я
2
© Я
2
©
Я
2
© MOUSE ADJ.
1.2.3 4.5.6
1, 7
6
2, 3, 5
4
6
This projector has two sets of menu screens that allow you to adjust the image and various projector settings.
These menu screens can be operated from the projector or the remote control with the following procedure.
∂
3
ƒ
ß
5
©
∂
3
ƒ
ß
5
©
Remote Control
Я
5
©