Samsung SF-750 Series - Manual (Page 42)

B ASIC F UNCTIONS 2.9
2
To set up the DRPD mode:
1 Press Menu until “Fax Setup” appears on the top line of the display.
2 Press the scroll button (
➛
or
❿
) until you see “DRPD Mode” on the
bottom line and press Enter.
3 When “Set” displays on the bottom line, press Enter.
“Waiting Ring” appears on the display.
4 Call your fax number from another telephone. It is not necessary to
place the call from a fax machine.
5 When your machine begins to ring, do not answer the call. The
machine requires several rings to learn the pattern.
When the machine completes learning, the LCD displays “End DRPD
[Setup].”
If the DRPD setup fails, “DRPD Ring Error” appears. Press Enter when
“DRPD Mode” displays and retry from step 3.
6 To return to Standby Mode, press Stop/Clear.
N OTES :
• DRPD must be set up again if you re-assign your fax number, or connect the
machine to another telephone line.
• After DRPD has been set up, call your fax number again to verify that the
machine answers with a fax tone. Then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT jack.
Receiving Faxes in the Memory
Your machine can receive faxes while you are making copies or printing a
received fax. If you receive a fax while you are copying, your machine
stores incoming faxes in its memory. Then, as soon as you finish copying,
the machine automatically prints the fax.