Samsung SF-750 Series - Manual (Page 49)

B ASIC F UNCTIONS 2.16
Speed Dialing
You can store up to 150 frequently dialed numbers in one, two or three-digit
speed dial locations (0-149).
Storing a Number for Speed Dialing
1 Press Phone Book.
2 Press Phone Book or the scroll button ( ➛ or ❿) to display
“Store&Edit” on the bottom line of the display. Press Enter.
3 Press Enter when “Speed Dials” appears on the display.
The display prompts you to enter a location number, showing the first
available number.
4 Enter a speed dial number between 0 and 149, using the number
keypad or scroll button (
➛ or ❿), and press Enter.
If a number is already stored in the location you chose, the display
shows the number to allow you to change it. To start over with another
speed-dial number, press Upper Level.
5 Enter the number you want to store using the number keypad and
press Enter.
To insert a pause between numbers, press Redial/Pause. A “-”
appears on the display.
6 To assign a name to the number, enter the name you want. For details
about entering characters, see page 1.13.
If you do not want to assign a name, skip this step.
7 Press Enter when the name appears correctly or without a name.
8 To store more fax numbers, repeat steps 4 through 7.
To return to Standby mode, press Stop/Clear.
Sending a Fax using a Speed Number
1 Feed the document(s) face up into the ADF.
For details about loading a document, see page 2.2.
2 Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.19.
3 Enter the speed dial number.
• For a one-digit speed dial number, press and hold the appropriate
digit button.
• For a two or three-digit speed dial number, press the first digit
button(s) and hold down the last digit button.
The corresponding entry’s name briefly displays.
4 The document scans into memory.
The fax number stored in the speed dial location is automatically
dialed. The document is sent when the remote fax machine answers.