Samsung Digimax 101 - Manual (Page 18)

18
Camera mode definition
IDENTIFICATION OF FEATURES
You can select the desired working mode by using the mode button located on the back of the camera.
This digital camera has 5 working modes. These are listed below
STILL IMAGE mode ( ) (p.33)
This mode is used for still image shots between 1m ~ infinity.
MOVIE CLIP mode ( ) (p.33)
A movie clip can be recorded as long as the available recording time allows.
PLAY mode (p.50)
In this mode, the stored images on the memory can be viewed on the LCD monitor on the back of
the camera or on an external monitor using a video output terminal.
PC mode (p.79)
Your computer will recognize the camera as a Removable Disk when connected by the USB cable.
You can transfer images between the computer and the camera.
If you are using Windows 98/98SE, you have to install the camera driver before connecting the USB
cable. The camera working mode will be changed to PC mode by connecting the USB cable.
SETUP mode (p.68)
You can select this mode on the STILL IMAGE/MOVIE CLIP/PLAY mode menu. In this mode, you
can set up basic settings such as BEEP, FORMAT, POWER OFF, RESET, DATE/TIME, VIDEO
OUT, LANGUAGE.