Samsung Digimax 101 - Manual (Page 90)

90
SOFTWARE MANUAL
Driver Storage Driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver.
You can use the camera as a USB card reader. After installing the driver and
connecting this camera to the PC, you can find [Removeable Disk] in
[Windows Explorer] or [My computer].
Setting up the camera driver for WINDOWS (p.91)
Setting up the camera driver for MAC (p.100)
Image Viewer Digimax Viewer 1.0 : Program for viewing a stored image
You can see the stored images in the memory directly on the PC
monitor. And you can copy, move, delete the images and scale
up /downscale the image sizes with Digimax Viewer.
For windows only.
Setting up Digimax Viewer (p.102) Using Digimax Viewer (p.104)
Application MGI PhotoSuite III SE : Image editing program for downloaded images.
For Windows only.
Setting up MGI PhotoSuite III SE (p.105) Using MGI PhotoSuite III SE (p.108)
Internet link : You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
INFORMATION
Check the system requirements ( p.88 ) before setting up the driver.
You should allow 5~10 seconds for running the automatic setup program according to the
capability of the computer. If the frame does not show, run the [Windows Explorer] and
select [Samsung.exe] in the CD-ROM Drive root directory.