Samsung Digimax 101 - Manual (Page 84)

84
BEFORE CONTACTING A SERVICE CENTER
Symptom
The camera
doesn t switch on
The camera
power is down
whilst in use
Batteries drain
quickly
There is low battery capacity
An AC Power Adapter is not
connected
Insert fresh batteries.
Connect an AC Power Adapter
The batteries are exhausted
The Camera is turned off automatically
due to the Auto power off function
The Adapter plug is not connected securely
Insert fresh batteries
Slide the power switch to reactivate
camera
Remove and re-insert the plug
The Camera is being used in low
temperatures
Mixing old and new batteries or
battery types
Keep the camera in warm
conditions (i.e. inside a coat or
jacket) and only remove it in order
to take images.
Insert fresh batteries (all of which
should be of the same type)
Causes Remedy
Camera does not
take images when
pressing the
Shutter button
The memory is full
The CARD has not been formatted.
The memory is exhausted
The camera power is off
The batteries are exhausted
The camera working mode is
positioned incorrectly
After turning the camera off, insert a
new card or delete a stored image.
Format the memory
Insert a new card
Turn the camera power on
Insert fresh batteries
Change the camera working mode
to the RECORDING mode.