Samsung Digimax 101 - Manual (Page 2)

2
INSTRUCTIONS
Use this camera in the following order.
If your video output signal is PAL type, you have to select [PAL/50Hz]
in [VIDEO OUT] menu before taking a picture.(p.77)
Set up
the camera driver
Before connecting the USB cable to the PC and this
camera, you have to set up the camera driver.
Install the camera driver that is contained in the
Application S/W CD-ROM. (p.91)
Take a picture
(p.33 ~ 49)
Insert supplied USB cable into PC USB port and the
camera USB connection terminal.
(p.79)
Check the camera power. If the power is turned off, slide
the camera switch to power it on.
(p.35)
Open Window’s EXPLORER and search [Removable
Disk].
(p.97)
Take a picture
Insert USB cable
Check the camera
power
Check
[Removable Disk]