Sony Ericsson NAS-E35HD - Manual (Page 26)

 GB
NAS-E35HD.GB.3-292-247-11(1)
You can transfer audio data in the HDD Jukebox
to a device connected to the (USB) port. For
details on which USB devices are compatible, see
page 71.
Notes
 If the AC power adaptor is supplied with the
connected device, it is recommended that you
operate the device on house current. When operating
the device on batteries, make sure the remaining
battery power is sufficient. We do not guarantee
against malfunctions, transfer failures, or destruction
of audio data caused by shortages in battery power.
 Make sure that you do not disconnect the USB cable
during transfer. If you do, the unit or the connected
device may malfunction.
//ENTER
TRANSFER 
Transferring audio data to a
USB device
1
Connect a USB device to the (USB)
port on the unit.
Refer also to the operating manual of the
USB device.
2
Select the HDD function.
3
Select an item (album or track) that
you want to transfer.
If you want to transfer the entire contents of
the HDD Jukebox, go to step 4.
4
Press TRANSFER.
The unit enters standby mode.
5
Press / to select the item you
want to transfer.
 To transfer all tracks for the selected
album:
Select “All Track”.
 To transfer the selected track only:
Make sure the desired track is selected.
6
Press ENTER.
Transfer starts.
Transferring audio data from the HDD Jukebox