Sony Ericsson NAS-E35HD - Manual (Page 34)

3 GB
NAS-E35HD.GB.3-292-247-11(1)
You can connect an optional USB device to the
(USB) port on the unit and listen to music stored
in the USB device. For details on the USB device
that can be connected to this unit, see “USB
devices supported by this unit” (page 71).
The audio formats that can be played back by this
unit are MP3*, WMA* and AAC*.
* Tracks with copyright protection (Digital Rights
Management) cannot be played by this unit.
Tracks downloaded from Internet websites (including
online music stores) may not be played by this unit.
Numeric
buttons
USB
////
ENTER
/

+/ –


/
1
Connect an optional USB device to
the (USB) port on the unit.
When USB cable connection is necessary,
connect the USB cable supplied with the
USB device to be connected.
Refer to the operation manual of the USB
device for details on the operation.
When the USB device is connected,
“Reading” appears, followed by the volume
label.
Note
It may take about 10 seconds before “Reading”
appears depending on the type of USB device
connected.
2
Press USB  to start playback.
Track name
Playback indication
and audio format Time information
(elapsed time) Track number in
the folder
Folder name
Other operation
To Do the following
Stop playback Press .
Pause playback Press . Press  again or
 to resume playback.
Find a point in a
track
Press and hold down
/ during playback,
and release it at the desired
point.
Select the previous/
next track
Press / during
playback.
Select a track Press /// to
select a track. Or press the
corresponding numeric
button*, and then press
ENTER.
Listening to music of a USB device