Using the play timer – Sony Ericsson NAS-E35HD User Manual

Page 51

Advertising
background image

51

GB

NAS-E35HD.GB.3-292-247-11(1)

You can set the timer to automatically turn the

unit on and off at a specified time. The unit starts

playing the HDD Jukebox, CD, tuner, DAB*, or

USB device automatically when it turns on. Make

sure the clock is correctly set beforehand (page

21).

* For the UK model only

1

Prepare the sound source.

Prepare the sound source and press

VOLUME +/– to adjust the volume.

To start from a specific track, create your

own program (page 39).

2

Press CLOCK/TIMER SET repeatedly

until “PLAY SET?” appears, and then

press ENTER.

“ON” appears and the hour indication

flashes.

3

Set the time to start playing.

Press / to select the hour, and then press

 so that the minute indication flashes. Do

the same to set the minute.

To go back to the hour indication, press .

When you press ENTER after setting

the minute, “OFF” appears and the hour

indication flashes.

4

Set the time to stop playing.

Repeat step 3.

5

Press

/ to select the desired

sound source, and then press

ENTER.

Using the Play Timer

6

Press

 to turn off the unit.

When the HDD Jukebox, CD, or USB

device is set as the sound source

About 60 seconds before the preset time, the

unit will automatically turn on, and about 10

seconds before, the Play Timer will activate.

If the unit is already on at about 60 seconds

before, the Play Timer will not activate.
When a radio broadcast or DAB service

is set as the sound source

About 15 seconds before the preset time the

unit will automatically turn on and the Play

Timer will activate. If the unit is already on

at this time, the Play Timer will not activate.

To continue playback after the Play

Timer’s stop time

You can cancel the Play Timer setting while the

timer is operating. When you do this, the stop

time is cancelled and playback continues.

To cancel the setting, press CLOCK/TIMER

SELECT repeatedly to select “TIMER OFF” while

the Play Timer operation is in progress.

To activate or check the timer again

Press CLOCK/TIMER SELECT repeatedly to

select “PLAY SELECT?”, and then press ENTER.

To cancel the timer

Press CLOCK/TIMER SELECT repeatedly to

select “TIMER OFF”, and then press ENTER.

To change the setting

Start over from step 1.

Tip

The Play Timer setting remains as long as the setting is

not cancelled manually.

Advertising