Sony Ericsson NAS-E35HD - Manual (Page 56)

5 GB
NAS-E35HD.GB.3-292-247-11(1)
Display
The display starts flashing as soon as you
plug in the power cord even though you
have not turned on the unit.
 Press DISPLAY while the unit is off. The
demonstration disappears.
Sound output
There is no sound.
 Press the VOLUME +/– buttons to cancel
muting. Sound is muted while Recording
Timer is in progress.
 Cancel pause.
 Confirm that nothing is connected to the 
(headphones) jack.
 Check the connections of the external
component.
 Connect the speaker cords firmly.
The right-left sound balance is bad or
reversed.
 Connect the speakers and other devices
correctly.
 Place the speakers as symmetrically as
possible.
 Connect only the supplied speakers.
The sound has no depth and seems to be
monaural.
 Connect the speakers and other devices
correctly.
There is severe humming or noise in the
sound.
 Connect the speakers and other devices
correctly.
 Move the audio connecting cord away
from any display, fluorescent light, or other
electrical devices.
 Move the unit away from any display or TV.
 If plugs or jacks are dirty, wipe them with a
cloth slightly moistened with alcohol.
 The inserted disc is scratched or dirty.
 Connect the unit to a different wall socket.
 Install a noise filter (available separately) to
the power cord.
HDD Jukebox
The unit cannot record a CD.
 The disc is not compatible with any of the
supported audio CD standards.
 The disc may be scratched or dirty.
The unit cannot import tracks.
 The following audio formats can be imported
to this unit.
 MP3 (“.mp3”)
 Windows Media Audio file (“.wma”)
 AAC (“.m4a”)
The unit cannot start importing/recording
audio data to the HDD Jukebox.
 The following problems may have occurred.
 The HDD Jukebox is full.
 The number of tracks and albums on the
HDD Jukebox has reached the upper limit.