Siemens OPTIPOINT 500 - Manual (Page 76)

IP Adapter Nur für den internen Gebrauch
P31003-E8400-A100-3-7620
7-12 Service Manual
Administration Via the Web Browser
9. Click "CorNet TC parameters" and enter the phone number, the CorNet TC password and
the operation mode. The operation mode must be entered. A maximum of 24 characters
are permitted for the first two input fields.
If more than 24 characters are input, the following message appears:
– "The submitted data contained an error: Invalid Phone number: <invalid value>"
– "The submitted data contained an error: Invalid CorNet TC login password: <invalid
value>"
10. Click "Speech parameters" and select the appropriate audio parameters.
The setting of the jitter buffer depends on the properties of the customer network (LAN) in each
case. Depending on the quality of the network, a zero speech delay ("Short" setting) or a sig-
nificant speech delay ("Long" setting) may occur.
CorNet TC parameters
Submit Reset
Return to Administrator settings Home
Phone number:
123456 CorNet TC login password:
(optional)
WARNING -
Changing any of these parameters will require to
subsequently restart the terminal to activate the new values
phone-side Operation mode:
Options are:
y phone-side
y system-side