Smeg STA6047 - Manual (Page 10)

2. Troubleshooting
The dishwasher is capable of signalling a number of faults through the
simultaneous illumination of several indicator lights, with the following
meanings:
FAULT DESCRIPTION
E1
E2
E3
E4
E5
Acquastop failure
The anti-flooding system has been activated
(for the relevant models only).
The system is tripped in case of water leaks.
Contact the after-sales service.
Safety level
The system which limits the water level inside the
dishwasher has been tripped. Interrupt the program
and switch of the dishwasher.
Switch the dishwasher back on, program it again
and start the washing cycle. If the problem persists,
contact the after-sales service.
Water heating malfunction
Il The water is not heated or the heating parameters
are not correct
Repeat the washing program; if the problem
persists, contact the after-sales service.
Water temperature monitoring malfunction
Interrupt the program and switch off the dishwasher.
Switch the dishwasher back on, program it again
and start the washing cycle.
If the problem persists, contact the after-sales
service.
Water intake malfunction
The appliance does not take in water or does not do
so correctly. Check that the water connections are
correct, the water intake tap is turned on and the
filter is not fouled. If the problem persists, contact
the after-sales service.
21
User instructions