Smeg STA6047 - Manual (Page 4)

User instructions
15
After using the table to identify the most appropriate washing program:
• press
the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
• keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
• close the door; after about 2" the program will start. While it is in
progress, the relative LIGHT will flash (indicating that the program is
being executed).
DURATION CONSUMPTION
PROGRAMME,
NUMBER & SYMBOL
LOAD CROCKERY
AND CUTLERY
PROGRAM
PROGRESS MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
1 SOAK
Pans and dishes
awaiting
a further wash
Cold prewash 1 5' 6 0,03
2
LIGHT
Wash immediately
after use for dishes
with light dirt
Wash at 45°C
Cold rinse
Rinse at 68°C
Dry
70' 1 2 1, 00
3 BIO (*)
EN 50242
Wash immediately
after use for dishes
with normal dirt
Cold prewash
Wash at 50°C
Cold rinse
Rinse at 6
2°C
Dry
1 80' ** **
4 NORMAL
Dishes
with normal dirt
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 68°C
Dry
90' 1 7 1, 30
5 INTENSIVE
Very dirty pans and
dishes (except
delicate items)
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry
110' 2 0 1,6 0
Only run the soak program with half loads.
The "3/1" option (6) is available for all programs except the soak program.
(*) Reference program as per EN 50242 standard.
3/1
end
3h 6h 9h
(**) See energy label.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and
room temperatures, and the type and amount of dishes.