User instructions – Smeg STA6047 User Manual
Page 8
19
ADJUSTING THE WATER SOFTENING SYSTEM
The dishwasher is equipped with an device for the user to adjust the
water softening system according to the hardness of the water supply.
According to the machine model, the selector which acts on the
adjustment may be located:
• inside the plastic locking ring located on the right-hand side, inside
the dishwasher;
• inside the water softener, just below the cap.
Both allow for adjustment to 5 settings:
WATER HARDNESS TABLE
WATER HARDNESS
German Degrees (°dH)
French Degrees (°dF)
SETTING
0 - 4
0 - 7
Setting N. 1 NO SALT
5 - 15
8 - 25
Setting N. 1
16 - 23
2
6 - 40
Setting N. 2
24
- 31
4
1 - 60
Setting N. 3
32
- 47
61 - 80
Setting N. 4
48
- 58
8
1 - 100
Setting N. 5
Contact your local water board for information on the hardness of your
water supply.
User instructions