Samsung Colour TV/VCR - Manual (Page 17)

17
5 When the station to be stored appears on the screen, select the NEW PR.
option by pressing P ▲ or P ▼ the required number of times.
6 Enter the programme number to be assigned to the channel using the
numeric, + or - buttons.
7 Press MEMORY ( ) to store the station.
Result: :STORE is displayed briefly in red.
8 To store other stations, return to Step 4 .
Otherwise, press MENU ( ) the appropriate number of times to return
to normal viewing.
➢
◆ If you wish to cancel the operation without storing the
station, press MENU ( ) before you press MEMORY
( ).
◆ If you have already stored the station, you can clear it
and replace it with a different station.
To clear a station, refer to the section entitled “Storing
and/or Clearing the Stored Stations” on page 14.
Storing the Stations Manually (cont.)
P 02
CURRENT PR. : P O
NEW PR. : P 1
NAME : - - - - -
SEARCH :
FREQUENCY : 192.00MHz
AFT : ON
:STORE X:CLEAR EXIT
ADJUST SELECT
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise.
This feature is working only weak signal condition, and that is
memorized on current channel, additional.
1 Press the MENU button ( ).
Result: The television menu is displayed.
2 Select the SETUP option by pressing P ▲ or ▼ buttons one or more times,
followed by the + button.
3 To activate this feature, press the + button to set the 3DB LNA option to
ON .
4 Press the MENU button ( ) the required number of times to return to
normal viewing.
5 If you wish to deactivate this feature, repeat the procedure and set the
3DB LNA option to OFF .
Activating the 3DB LNA (Low Noise Amplifier) Feature (depending on the model)
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST SELECT EXIT
SETUP
PANEL LOCK
: OFF
ON TIMER : OFF
3DB LNA : ON
ADJUST SELECT EXIT
REC
TRK CLEAR LANG.SEL
EJECT
INDEX SLEEP MEMORY
P/S CRYSTAL PB
02255A_eng2_mono 6/29/04 10:45 AM Page 17