Samsung Colour TV/VCR - Manual (Page 20)

Setting the Combi Vision to Switch On Automatically
You can set your COMBI VISION to switch on automatically every
day and stop after one hour if none of its functions are used.
➢
Before using this function, check that the time has been
correctly set. If it has not been set, the time and date
setting function is activated automatically; refer to
page 12 for further details.
1 Press MENU ( ).
2 Select SETUP by pressing the P ▲ or ▼ buttons the required number of
times.
3 Press the + button.
Result:
The corresponding menu is displayed.
4 Select ON TIMER by pressing the P ▲ or ▼ buttons the required number of
times.
5 To... Then...
Set the time at which the 1 Press the + button to display the clock.
television is to switch on 2 Select the hour and minutes by
pressing the numeric buttons.
Cancel the automatic Press the + button once.
switch on timer Result: OFF is displayed.
6 Place the set in Standby mode, by pressing POWER ( ).
Result: The set will be switched on every day at the time requested
and will remain on for one hour if no other function is used
during this time.
20
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST SELECT EXIT
SETUP
PANEL LOCK
: OFF
ON TIMER : ON
ADJUST SELECT EXIT
GB
TIME : 15:07
DATE : 06/04/00 THU
ADJUST SELECT EXIT
02255A_eng2_mono 6/29/04 10:45 AM Page 20