Samsung Colour TV/VCR - Manual (Page 18)

18
GB
Adjusting the Picture and Storing Your Preferences
Several settings are available on your television to enable you to
control the quality of the picture:
◆ Contrast, Bright, Sharpness, Colour.
1 Press MENU ( ).
Result: The television menu is displayed.
2 Select the PICTURE option by pressing the + button.
Result: The picture adjustment options are displayed.
3 Select one of the options by pressing P ▲ or ▼ one or more times,
followed by the + button.
Result:
A horizontal bar is displayed.
4 To decrease or increase the value displayed, press - or + respectively.
➢
You have approximately three seconds to modify the value, before
the previous menu is redisplayed.
5 When you are satisfied with the settings, press MENU ( ) the
appropriate number of times to return to normal viewing.
Result:
Your settings are stored and will be kept next time you switch
the television on.
➢
These picture settings are maintained when you:
◆ Place the set in Standby mode
◆ Unplug the set from the wall socket or a power failure
occurs
PICTURE : CUSTOM
CONTRAST 90
BRIGHT 50
SHARPNESS 50
COLOR 50
ADJUST SELECT EXIT
CONTRAST 91
Adjusting the Picture Setting
You can select the type of picture which best corresponds to your
viewing requirements. The following picture effects are available in
the order given: Custom, Standard, Dynamic, Movie and Mild.
1 Press MENU ( ).
Result: The television menu is displayed.
2 Press - or + button.
Result: The “Picture” menu is displayed.
3 Press - or + button repeatedly to cycle through the five choices: CUSTOM,
STANDARD, DYNAMIC, MOVIE, MILD.
➣
You can select the required picture effect by simply
pressing the “P.STD” (Picture standard) button on the
remote control.
PICTURE : CUSTOM
CONTRAST 90
BRIGHT 50
SHARPNESS 50
COLOR 50
ADJUST SELECT EXIT
DISPLAY
REC
TRK CLEAR LANG SEL
EJECT
INDEX SLEEP MEMORY
P/S CRYSTAL PB
P.STD
P
02255A_eng2_mono 6/29/04 10:45 AM Page 18