Siemens CT70 - Manual (Page 30)

©
Siem
ens AG
2003, L
:\Mobi
l\R65
\C
70_H
era_PoC\e
n\f
ug\C70_
Pho
ne.fm
29 Calling
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (29) of FUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (10.01.2005, 13:28)
Conference
b
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be ena-
bled specially.
A connection has already been
established:
§Options§
Open menu and select
Hold . The current connec-
tion is maintained.
J
Now dial a new number.
When the new connec-
tion is established ...
§Options§
... open menu and select
Conference . The held call is
joined.
Repeat procedure until all partici-
pants are linked together
(up to 5 participants).
End
B
All calls in the multiparty
conversation are ended
when the End key is
pressed.
Call options
The following functions are only
available during a call:
§Options§ Open menu.
Hold Hold current call.
Microphone
on
If switched off, the person
on the other end of the line
cannot hear you (muting).
Also:
*
Press and hold.
Handsfree Call via the loudspeaker.
Volume Adjust handset volume.
Default book Display Phone-
book/Addressbook.
Conference (See p. 29)
Time/charge Display talktime that has
elapsed so far and (if set)
cost incurred during the
call.
Send DTMF Enter control codes (num-
bers) for remote inquiries
to an answering machine.
Call
transfer
=
Connect the original call
with a second call. For you,
both calls are now ended.
Main menu Access to the main menu.
Call status List all held and active calls
(e.g. participants in a con-
ference).