Siemens CT70 - Manual (Page 31)

©
Sieme
ns
AG
2003, L:\Mobil\R65\C
70_H
era
_P
oC\en\fug\C70_P
hone.fm
Calling 30
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (30) of FUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (10.01.2005, 13:28)
Direct call
If this is active, only one number can
be dialled.
Switch on
C
¢
T
¢
Security
¢
Direct call
C
Confirm selection.
J
Enter phone code.
When first prompted you define and
enter the phone code (4 - 8 digits).
C
Confirm selection.
Please do not forget this code (p. 19)!
Ï
/
J
Select phone number
from the Phone-
book/Addressbook or
enter it.
C
Confirm.
Apply
§Carol§ To dial the phone number
(e.g. Carol’s phone
number), press and hold
the right soft key.
Switch off
#
Press and hold .
J
Enter phone code.
C
Confirm input.
Control codes (DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists . These
entries are transmitted directly as
DTMFcodes (control codes).
§Options§
Open menu.
Send DTMF
Select.
Using the Phonebook/
Addressbook
Store phone numbers and control
codes (DTMF codes) in the Phone-
book/Addressbook in the same way
as a normal entry, see p. 32.
J
Enter phone number.
0
Press and hold until a "+"
appears in the display
(wait for the connection
to be established).
J
Enter DTMF codes
(numbers).
0
If necessary, wait again
for three seconds at a
time for the receiver to
process the entries safely.
J
Enter a name.
§Save§ Store entry.
You may also store just the
DTMFcodes (numbers) and then
send them during the call.