Siemens CT70 - Manual (Page 91)

©
Sieme
ns
AG
2003, L:\Mobil\R65\C
70_H
era
_P
oC\en\fug\C70_N
etwork
.fm
Setup 90
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (90) of FUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (10.01.2005, 13:28)
Your service provider is displayed:
§List§ Display list of preferred
networks.
Create/change entry:
<Empty> or select an existing entry,
then select a new service
provider in the list and
confirm.
Record new service provider (last
entry in the list):
Furth.network
Select, enter the provider data and
save it.
Band selection b
Select either GSM 900, GSM 1800 or
GSM 1900.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
User group b
Depending on the service provider,
you can create groups with this serv-
ice. These can have access to inter-
nal (company) information, for
example, or special tariffs apply. The
details can be clarified with your
service provider.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network configu-
ration).
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.