Siemens CT70 - Manual (Page 82)

©
Siem
ens AG
2003, L
:\Mobi
l\R65
\C70_
H
era_PoC\e
n\f
ug\C70_
CallSetup.fm
81 Setup
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (81) of FUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (10.01.2005, 13:28)
All calls
b
All calls are diverted.
Ç
Icon in the top line of the
display in standby mode.
Not reachable
Divert occurs if the phone is
switched off or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting is activated (p. 26) you
will hear the call waiting tone during
a call (p. 28).
Receiving data
b
Data calls are diverted to a phone
number with a PC connection.
Call screening b
Only calls from phone numbers that
are in the Phonebook/Addressbook
or assigned to a group are signalled.
Other calls are only displayed.
Any key answ.
Incoming calls can be accepted by
pressing any key
(except for
B
).
Minute beep
During a call you have initiated you,
and only you, will hear a beep
every minute so you can check the
call’s duration. The recipient does
not hear this beep.
Additional information
Note that the divert is stored in the network
and not in the phone (e.g., when the
SIM card is changed).
Reactivate divert
The last divert has been stored. Proceed as
with "Set divert". The stored phone number
is displayed. Confirm number.