Siemens CT70 - Manual (Page 81)

©
Sieme
ns
AG
2003, L:\Mobil\R65\C
70_
H
era
_P
oC\en\fug\C70_C
al
lSe
tup.fm
Setup 80
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (80) of FUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (10.01.2005, 13:28)
Setup Call setup
C
¢
T
¢
Call setup
¢
Select function.
Hide ID b
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
To suppress this display, you can
enable the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify the conditions under
which calls should be diverted to
your mailbox or other numbers.
Status check
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is trans-
mitted by the network and dis-
played.
Ö
Condition set.
Õ
Not set.
Ô
Display if status is
unknown (e.g. with a new
SIM card).
Clear all
b
All set diversions are cleared.
Set up call divert (example):
The most common condition for call
divert is, for example:
Unanswered
b
I
Select Unanswered .
(Includes the conditions
Not reachable , No reply ,
Busy , see below)
C
Confirm.
Set Select.
C
Confirm.
Ï
/
J
Select or enter the phone
number to which the calls
are to be diverted.
§Mailbox§ Use existing mail-
box phone numbers, or
enter them if necessary.
§OK§ Confirm. After a short
pause, the setting is con-
firmed by the network.