Siemens CT70 - Manual (Page 86)

©
Siem
ens AG
2003, L
:\Mobi
l\R65
\C70_H
era_PoC\e
n\f
ug\C70_
Conne
ctiv
ity.f
m
85 Setup
VAR Langua
ge: en; V
A
R issue
date: 041104
left page (85) of FUG_C70 Hera (PoC), en, A31008-H7803-A1-1-7619 (10.01.2005, 13:28)
Setup Connectivity
C
¢
T
¢
Connectivity
¢
Select function.
GPRS b
(General Packet Radio Service)
C
Switch GPRS on/off
GPRS is a method for transmitting
data faster in the mobile network.
Use GPRS and, if the network has suf-
ficient capacity, you can be con-
nected to the Internet permanently.
Only the actual transmission time is
charged by the network operator.
Some service providers do not yet
support this service.
Shown in the display:
GPRS info
Displays information on connection
status.
IrDA
Your phone has an infrared inter-
face. With this interface, you can
exchange data such as pictures, ring-
tones, Addressbook entries, busi-
ness cards or organiser data with
other devices which also have an
infrared interface.
The infrared interface is on the left
side of the phone. The distance
between the two devices must not
exceed 30 cm. The infrared windows
in both appliances must be aligned
as accurately as possible with each
other.
Shown on the display:
¯
IrDA activated.
®
During transmission.
Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as MMS, WAP .
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.
£
Activated and available.
¢
Registered.
¤
Temporarily interrupted.