Sony MSW-A2000P - Manual (Page 9)

1-3 MSW-A2000
MSW-A2000P
533
12.7
112
87
87
174
19.5
87
37
37
31
31
123.8 34
263.5
415.9
416(Rail-installed width)
427(Unit width)
45.5
15.9 465
364 31.5
427
481 454 45 105
577(Maximum traveling distance)
Unit : mm
Mass of MSW-A2000/A2000P : 22 kg
544
457.5 48 (38.5)
1-5. Installation Space
Moreover, an air flow that is effective in cooling the unit is
essential. If the ventilation is not enough, the unit may be
damaged because of an increase of the internal tempera-
ture.
n
This unit is air-cooled by the five fans. The operation with
the upper lid is removed affects the air cooling by the fans.
Complete the work in a short time as possible when operat-
ing the unit for inspection with the upper lid removed. If it
takes a long time, blow to the unit by an electric fan to cool
the unit.
1-5. Installation Space
When installing, the installation space must be secured in
consideration of the ventilation and service operation.
. Do not block the ventilation slots at the left side and
right side panels, and vents of the fans.
. Leave a space around the unit for ventilation.
. Leave more than 40 centimeters of space in the rear of
the unit to secure the operation area.
When the unit is installed on the desk or the like, leave at
least four centimeters of space in the left and right sides.
Leaving 40 centimeters or more of space above the unit is
recommended for service operation.
Dimensions when Rack-Mounting
n
The MSW-A2000/A2000P allows the operation with the detached lower control panel unit.
For details, refer to Section 1-12.
n Remove the feet when rack mounting.