Samsung DVD-R135 - Manual (Page 14)

14 - English
1. RF IN / RF OUT
Connects antenna cables.
2. HDMI OUT
Connects the input of external equipment using a
HDMI-HDMI cable or HDMI-DVI cable.
3. DIGITAL AUDIO OUT(OPTICAL)
Connects to an amplifier having a digital optical
audio input jack.
4. DIGITAL AUDIO OUT(COAXIAL)
Connects to an amplifier having a digital coaxial
audio input jack.
5. AUDIO OUT
Connects to the audio input of external equipment
using audio cables.
6. VIDEO OUT(good video quality)
Connects the input of external equipment using a
Video cable.
7. S-VIDEO OUT(better video quality)
Connects the input of external equipment using an
S-Video cable.
8. COMPONENT VIDEO OUT(best video quality)
Connects to equipment having Component video
input jacks.
9. AV 1 AUDIO IN
Connect the output of external equipment using
audio cables
10. AV 1 VIDEO IN
Connects the output of external equipment using
a video cable.
11. AV 1 S-VIDEO IN
Connects the output of external equipment using
a S-Video cable.
Rear Panel
■ The Antenna connection does not pass
output signal of DVD. To watch a DVD on
your TV, you must connect audio/video
cables.
NOTE
G
etting Started
01094A-R135-XSS-ENG_02~16 3/28/06 4:08 PM Page 14