Samsung DVD-R135 - Manual (Page 30)

30 - English
S
ystem Setup
You can connect the DVD Recorder to an external amp
or Home Theatre.
Allow you to setup the Audio device and sound status
depending on the audio system in use.
Setting up the Audio
Options
1 With the DVD Recorder in Stop mode/No
Disc mode, press the
MENU button.
2 Press the …† buttons to select Setup , then
press the OK or √ button.
3 Press the …† buttons to select Audio , then
press the OK or √ button.
Audio setup menu will be displayed.
4 Press the …† buttons to select the desired
audio option, then press the
OK or √
button.
5 Press the …† buttons to select the desired
item, then press the
OK or √ button.
NOTE
■ Press the RETURN or œ button to return
to the previous menu.
Press the
MENU button to exit the menu.
Audio Options
Digital Output
1. PCM : Select this when you have no equipment that
can decode Dolby Digital (or MPEG-2) signal.
When you play Dolby Digital (or MPEG-2)
sound track, the digital output are converted to
PCM Stereo.
2. Bitstream : Output Dolby Digital (or MPEG-2) audio as
bitstream. Select this when your AV
receiver or AV amplifier have Dolby Digital
(or MPEG-2) Decoder.
■ Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always outputted as
PCM. It has no relation with Digital Output
setting.
■ Be sure to select the correct Digital
Output or you will hear no sound or loud
noise.
NOTE
DTS
1. Off : Doesn’t output DTS signal.
Select this when your AV receiver or AV
amplifier does not have DTS decoder.
2. On : Outputs DTS Bitstream via digital output when you
play DTS track.
Select this only when your AV receiver (or AV
amplifier) have DTS decoder.
■ When DTS soundtrack is played, sound
does not output from AV Audio Output.
NOTE
Programme DVD-Recorder
Scheduled Record List √ √
No Disc
Programme
Setup
Setup DVD-Recorder
No Disc
Programme
Setup
System √ √
Clock Set √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
Install √ √
RETURN OK MOVE EXIT
RETURN OK MOVE EXIT
Audio DVD-Recorder
No Disc
Programme
Setup
Digital Output : PCM √ √
DTS : Off √ √
Dynamic Compression : On √ √
NICAM : On √ √
RETURN OK MOVE EXIT
Audio DVD-Recorder
No Disc
Programme
Setup
Digital Output : PCM √ √
DTS : Off √ √
Dynamic Compression : On √ √
NICAM : On √ √
PCM
Bitstream
RETURN OK MOVE EXIT
01094A-R135-XSS-ENG_17~37 3/28/06 4:19 PM Page 30