Seiko Group 201 - Manual (Page 12)

10
5. Connect the cable for the DM-D500 to the DM connector on the IR
Series.
Attaching to the TM-H5000II/TM-J8000
The DM-D500 can be attached directly to the TM-H5000II/TM-J8000
printers using the “DM-D pole unit for TM printers (Type B)” (DP-503).
Required items
The following items are used to attach the DM-D500 to the
TM-H5000II/TM-J8000 printers. These items are packed with the
“DM-D pole unit for TM printers (Type B)” (DP-503).
base
fixing screws
support C
support B
(for extension)