Sanyo DWM-2500 User Manual

Page 11

Advertising
background image

-E10-

3

4

CHANNEL

TO TV

ANT. IN

R-AUDIO-L

VIDEO

A/V INPUT JACKS

VHF/UHF

ANTENNA

IN

1

2

3

4

3

4

CHANNEL

TO TV

ANT. IN

R-AUDIO-L

VIDEO

A/V INPUT JACKS

VHF/UHF

ANTENNA

IN

3

4

CHANNEL

VHF/UHF

FROM ANT.

IN

OUT

TO TV

IN

OUT

LINE1(AUX1)

VIDEO

L

R

L

R

AUDIO

3

1

2

6

6

4

5

Using RF Modulator
If your TV does not have a Video input jack and has an antenna
terminal only, please purchase the *RF Modulator (not supplied).
(*Please consult your audio/video dealer.)

Example: Unit, TV and RF Modulator connections

1. Connect the antenna cable (not supplied) to the ANT. IN

terminal of the RF Modulator.

2. Connect the 75-ohm coaxial cable (not supplied) between

the TO TV terminal of the RF Modulator and the VHF/UHF
ANTENNA IN terminal of the TV.

3. Connect the Video cable with yellow connectors (supplied)

between the MONITOR OUT VIDEO jack of the unit and the
VIDEO input jack of the RF Modulator.

Example: Unit, VCR, TV and RF Modulator connections

1. Connect the antenna cable (not supplied) to the VHF/UHF

FROM ANT IN terminal of the VCR.

2. Connect the 75-ohm coaxial cable (not supplied) between

the TO TV OUT terminal of the VCR and the ANT. IN
terminal of the RF Modulator.

3. Connect the 75-ohm coaxial cable (not supplied) between

the TO TV terminal of the RF Modulator and the VHF/UHF
ANTENNA IN terminal of the TV.

4. Connect the audio cables (not supplied) between the VIDEO

(AUDIO) IN 1 or 2 jacks of the unit and the AUDIO OUT jacks
of the VCR. Use the red connectors for the right-R jacks and
the white connectors for the left-L jacks.

5. Connect the Video cable with yellow connectors (supplied)

between the MONITOR OUT VIDEO jack of the unit and the
VIDEO input jack of the RF Modulator.

6. Turn on the TV, and set the channel number (CHANNEL3 or

CHANNEL4) on all TV, VCR and RF Modulator, whichever
is not used for regular broadcasts in your area.

Note:
For more details, please refer to the instruction manual of the RF
Modulator.

4. Turn on the TV, and set the channel number (CHANNEL3 or

CHANNEL4) on both TV and RF Modulator, whichever is not
used for regular broadcasts in your area.

Note:
For more details, please refer to the instruction manual of the RF
Modulator.

To MONITOR OUT VIDEO jack (Yellow)

To MONITOR OUT VIDEO jack
(Yellow)

Partial back panel

Partial back panel

HiFi Stereo VCR

RF Modulator

RF Modulator

TV

TV

Advertising