Sanyo DWM-2500 - Manual (Page 39)

-E38-
SHIFT
SLEEP
MAINTENANCE
WARNING:
FOR YOUR PERSONAL SAFETY, BE SURE TO
DISCONNECT THE AC POWER CORD BEFORE
PROCEEDING WITH ANY MAINTENANCE OR CLEANING.
Cleaning the cabinet
Use a clean soft cloth moistened with plain lukewarm water and
wrung dry. Never use benzol, benzene or other strong chemical
cleaners since these could damage the finish of your unit. It is
important that no liquid reaches the inside of the unit.
The sleep timer automatically switches off the power after a
preset time has elapsed. The volume will gradually be reduced
(fade-out) during the 1 minute period before the unit turns off.
There are 4 time periods available: 30, 60, 90, and 120 minutes.
Press [SLEEP] repeatedly while holding [SHIFT] down to select
the desired sleep time. “SLEEP” and the selected time blink on
the FL display.
After several seconds, the original display returns and the
brightness of the display reduces. “SLEEP” blinks.
To check the remaining sleep time
Press [SLEEP] once while holding [SHIFT] down. The remaining
time is displayed.
After several seconds, the original display returns.
To release the sleep timer while in operation
Press [SLEEP] repeatedly while holding [SHIFT] down until
“SLEEPOFF” appears.
The timer is also released if the power is switched off.
Need help? Call
1-800-813-3435
SLEEP TIMER OPERATION