Setting audio, Need help? call – Sanyo DWM-2500 User Manual
Page 34
-E33-
Audio DRC
Center Delay
Surr. Delay
Off
0ms
5ms
5
5, 7, 9, 11,
13
ENTER
3, 4, 6, 8,
10, 12, 14
4
5, 9, 13, 15
SETUP
1, 15
a
2
Setting Audio
The sound from speakers can reach the listening position at
different times depending the speaker placements. You can
allow for this difference by changing the delay time of the center
and surround speakers.
You also can change the Dynamic Range Control (DRC).
1. Press [SETUP] in the stop mode.
The setup screen appears.
2. Press [
a
] to select “Audio”.
3. Press [ENTER].
“Audio” screen appears.
10. Press [ENTER].
“Center Delay” and the selected delay time remain.
11. Press [
p
] to select “Surr. Delay”.
12. Press [ENTER].
The submenu (“0ms”, “5ms”, “10ms” and “15ms”) appears.
13. Press [
p
] or [
o
] to select the surround speaker delay time.
Surround speaker delay time
If D1
D3, set the delay time to “0ms”.
If D1>D3, set the delay time as follows:
Difference between D1 and D3
Delay time
5 feet (Approx. 152.5cm)
5ms
10 feet (Approx. 305cm)
10ms
15 feet (Approx. 457.5cm)
15ms
14. Press [ENTER].
“Surr. Delay” and the selected delay time remain.
15. Press [
o
] to skip back to the setup screen (or press [SETUP]).
D1: The distance from the front speaker
D2: The distance from the center speaker
D3: The distance from the surround speaker
Front left speaker
Front right speaker
Center speaker
Surround left
speaker
Surround right
speaker
D1
D2
D3
D3
D1
Need help? Call
1-800-813-3435
4. Press [ENTER] to select “Audio DRC”.
The submenu (“On” and “Off”) appears.
5. Press [
p
] or [
o
] to select “On” or “Off” as desired.
On: It will compress the dynamic range. It may have no
effect with some discs.
Off: Sound with a wide dynamic range.
6. Press [ENTER].
“Audio DRC On” or “Audio DRC Off” remains.
7. Press [
p
] to select “Center Delay”.
8. Press [ENTER].
The submenu (“0ms”, “1ms”, “2ms”, “3ms”, “4ms” and “5ms”)
appears.
9. Press [
p
] or [
o
] to select the center speaker delay time.
Center speaker delay time
If D1
D2, set the delay time to “0ms”.
If D1>D2, set the delay time as follows:
Difference between D1 and D2
Delay time
1 foot (Approx. 30.5cm)
1ms
2 feet (Approx. 61cm)
2ms
3 feet (Approx. 91.5cm)
3ms
4 feet (Approx. 122cm)
4ms
5 feet (Approx. 152.5cm)
5ms