Sony Ericsson Cordless DT590 - Manual (Page 107)

107 MD Evolution – Cordless DT590
More Features on your Extension
The alarm clock is now set and the alarm clock icon in the display
indicates that the alarm clock is activated.
Receive an Alarm clock call
“Alarm clock HH:MM” is displayed and the red LED flashes when
the alarm sounds. Ь Ы
Press.
“Cancel alarm?” is displayed. Ь Ы
Press to remove the alarm clock setting.
Note : If you do not answer the alarm clock, the alarm clock
icon in the display keeps flashing and the alarm will sound
again after some minutes.
Cancel Alarm clock
Route : Menu » Toolbox » Alarm clock ¾
Press.
º
Select the “Toolbox” tab.
º Ь Ы
Select the menu item “Alarm clock” and confirm.
The following options are available :
•
Set
• Clear º Ь Ы
Select the menu item “Clear” and confirm.
The alarm clock icon disappears.
Calls Re-Routing to Attendants Protection
Usually, your external calling parties can contact you from external
network(s), directly through your direct calling numbers, or DID
numbers (Direct Inward Dialling).
They may also contact you through your facility's general number.
In this case, your incoming external calls are directed through your
facility's attendants.