Power supply, Charging and batteries – Sony Ericsson Cordless DT590 User Manual

Page 12

Advertising
background image

Important

MD Evolution – Cordless DT590

12

In the U.S., vehicles powered by liquid petroleum gas (such as

propane or butane) must comply with the National Fire Protection

Standard (NFPA-58). For a copy of this standard, contact the

National Fire Protection Association, One Battery march Park,

Quince, Massachusetts 02269, Attention: Publication Sales

Division.

Power supply

Connect the AC power adapter of the charging unit only to the

designated power sources as marked on the charger.

Make sure the cord is positioned so that it will not be subjected

to damage or stress.

To reduce risk of electrical shock, unplug the chargers from any

power source before attempting to clean or move it.

The AC power adapters must not be used outdoors or in damp

areas.

Never modify the cord or plug. If the plug will not fit into the

outlet, have a proper outlet installed by a qualified electrician.

Limit the distance between the mains socket and the cordless

phone when charging for easy accessibility.

As an energy saving measure, disconnect the charger from the

main socket after charging.

When unplugging the mains adapter from the power outlet,

make sure that your hands are dry and ensure that you hold the

solid portion of the mains adapter.

Do not pull on cables.

Charging and batteries

Please read carefully the following important precautions

before the first time use of the batteries. Make sure to

understand and observe all cautionary instructions stated, so

as to avoid any possible safety hazards that are caused by

any misuse, misapplication or damage to batteries.

Only use batteries, mains adapters or desk and rack chargers

designed for use with your product.

Use of power sources not explicitly recommended may lead to

overheating, reduced battery performance, distortion of the

equipment and fire or other damages.

Advertising