Specifications and parts, Specifications – SPX Cooling Technologies SD25 User Manual
Page 30
June 2004
T-40409-A
Page 22
Specifications and Parts
This section lists the specifications of your SD25 Series screwdrivers under typical operating
conditions and available screwdriver-to-controller cables.
Specifications
This section lists general specifications, torque and RPM ranges, and length and weight ranges for
SD25 Series screwdrivers.
General Specifications for SD25 Series Screwdrivers
Description Specifications
Motor current
8A peak
Motor commutation
Hall-based, brushless DC motor
Screwdriver logic power
24 VDC
Screwdriver pushbuttons*
Start, direction, auxiliary, push-to-start
Screwdriver connector
High density 26-pin connector
Screwdriver Display
Three indicator / status LEDs for torque/angle
Screwdriver Headlights
Turn on when screwdriver is running in forward or reverse
Ambient operating temperature
0
to 60 C (32 to 140 F)
Relative humidity
0 to 85% R.H. (non-condensing)
* Not available on fixtured screwdrivers
Torque, RPM, Length and Weight Ranges of SD25 Series Screwdrivers
Torque Range
Screwdriver
Type
Nm lbf-in ozf-in
kgfcm
RPM Range
Length Range
Weight Range
In-line
1.1
10
160
11.5
1700
9.4 in / 239 mm
0.91 lb / 0.41 kg
In-line
3.3
20
320
23.0
1100
9.4 in / 239 mm
0.91 lb / 0.41 kg
In-line
3.9
35
560
40.3
800
9.4 in / 239 mm
0.91 lb / 0.41 kg
In-line
5.6
50
800
57.6
500
9.6 in / 244 mm
1.1 lb / 0.49 kg