SPX Cooling Technologies SD25 - Manual (Page 5)

June 2004 T-40409-A Page i
Preface
Our GSE tech-motive tool SD25 Series Screwdriver is easy to operate and comes with a manual that
includes instructions to help you use it safely, make minor adjustments, and perform routine
maintenance.
Who Should Use This Manual
This manual is written for the engineers and technicians, who will set up, use and maintain
GSE tech-motive tool SD25 Series screwdrivers.
How to Use This Manual
This manual introduces you to the SD25 Series Screwdriver and provides general safety and electrical
safety guidelines for using it, and covers installation, adjustment, calibration and troubleshooting of
the screwdrivers.
For the latest revision of drawings, please contact our Technical Service Department at
1-248-596-0600.
Conventions
The following conventions are used throughout this manual for the safety of personnel, equipment,
software, and data. The conventions include warnings, cautions, and notes, as follows:
WARNING!
!
It can be dangerous to personnel and/or machine systems,
if operating instructions are not followed. The information
appears in a box in italicized boldface type.
CAUTION! There may be damage to equipment, and loss of software
and data, if operating instructions are not followed. The
information is indented and in italicized boldface type.
NOTE:
?
Information that adds to your knowledge of the equipment
and/or software. The information is indented and italicized.
i