Sony Multi-Profile CCD Box Type Network Camera HQ1 - Manual (Page 12)

Network Camera User’s Guide
12/83
4. Connect the external power supply to Camera
Connect the attached power adapter to the DC power jack of the camera. Note: Use the
power adapter, 12VDC, included in the package and connect it to wall outlet for AC
power.
Once you have installed the camera well and powered it on, the power LED will turn on.
It means the system is booting up successfully. Furthermore, if you have a proper
network connection, and access to the camera, the LED will flash green under wired
mode.
5. Done
Power
Cable