Samsung Digimax 340 - Manual (Page 43)

ADV
ANCED
SETTING UP THE SHOOTING FUNCTION
QUALITY
In STILL IMAGE and MACRO SHOT mode, you can select the image data compression rate.
The higher the QUALITY setting, the better the final image will be. However, the high quality
setting will require more memory and therefore reduce the number of images you can store
on the CF CARD.
SUPER FINE is the highest quality and NORMAL is the lowest setting. Choose the setting
appropriate for your needs.
1. Turn the camera power on.
2. Rotate the mode dial to the STILL IMAGE mode or MACRO
SHOT mode.
3. Do not turn the LCD monitor off.
4. Press MENU button to display the menu on the LCD
monitor.
5. Press UP ( ) / DOWN ( ) button and select [QUALITY].
6. The cursor can be moved by pressing the RIGHT ( )
button to the [QUALITY] sub menu.
7. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) buttons. The default is SUPER FINE.
8. After selecting the desired sub menu, press the OK button to
confirm the setting.
9. Press the MENU button to cancel the menu display.
Reference
The image file is stored in *.jpg.
This file format complies with DCF(Design rule for Camera File system).
< STILL IMAGE mode >
< MACRO SHOT mode >
P1 SELECT OK SET
QUALITY
SUPER FINE
FINE
NORMAL
P1 SELECT OK SET
QUALITY
SUPER FINE
FINE
NORMAL