Samsung Digimax 340 - Manual (Page 87)

SOFTW
ARE
HOW TO SET UP THE SOFTWARE FOR WINDOWS
Setting up USB driver for Windows
4
After restarting the computer, connect the PC to the camera with the USB cable.
5
Turn the camera power on with the mode dial set on PC mode.
[Found New Hardware Wizard] will appear and the computer
will recognize the camera.
6
USB Driver installation is complete. After installation,
[Removable Disk] will be displayed under [My computer] as
shown alongside.
Note
Before connecting the camera to the PC, you must install the camera driver.
After driver installation, you have to restart the computer.
If the camera is connected to PC before Driver installation, [Add Found New Hardware
Wizard] will appear. In this case, follow [Add Found New Hardware Wizard] to install the
camera driver.
When windows search for new drivers in its database on your hard drive,
select [Driver Setup] folder by browsing the Application CD.
Should the computer not find the Camera Driver after installation, please try one or more of
the following measures.
1. Delete the camera driver, and re-install the driver.
2. Refer to FAQ(refer to page 115) to check for a possible solution to the problem.
If your PC’s central processing unit is VIA Chip (This is shown in the USB Host Controller),
download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com).