Samsung Digimax 340 - Manual (Page 81)

ADV
ANCED
BEFORE CONTACTING A SERVICE CENTER
Symptom
The play back
display is not very
clear
No image on
external monitor
Cause
The lens or LCD monitor is
smudged or dirty.
The external monitor has not
been connected properly with
the camera.
There are incorrect files in the
CF CARD.
Clean the lens or LCD
Check the connection
cables.
Insert CF CARD that has
correct files.
Remedy
When using the
PC’s explorer,
‘Removable Disk’
file does not show.
Cable connection is
incorrect.
The camera is off.
There are no batteries, the
batteries are exhausted or
the AC adapter is not
connected.
The operating system is not
Windows 98, 98SE, 2000,
ME, XP. Alternatively the PC
does not support USB.
USB driver is not installed.
The mode dial is not set on
PC mode.
Check the connection.
Turn the camera on.
Insert new batteries or check
the adapter connection.
Install Windows 98, 98SE,
2000, ME, XP to PC that
supports USB.
Install “USB Storage Driver”
Rotate the mode dial to PC
mode