Setting up play back functions – Samsung Digimax 340 User Manual
Page 60
SETTING UP PLAY BACK FUNCTIONS
SLIDE SHOW
Images can be displayed continuously at pre-set intervals.
1. Turn the camera power on.
2. Rotate the mode dial to PLAY mode.
3. Do not turn the LCD monitor off.
4. Press the MENU button to display the menu on the LCD monitor.
Press the UP (
) / DOWN (
) button and select [SLIDE
SHOW].
5. Shift the cursor to the [SLIDE SHOW] sub menu by pressing
RIGHT (
) button.
6. Press UP (
) / DOWN (
) button and select [START].
7. Press the OK button to start the menu display.
8. To stop the SLIDE SHOW, press the PLAY&PAUSE ( ) button.
Selecting direction
Select SLIDE SHOW DIRECTION
1. Select [DIRECTION] in step 6 by pressing the UP (
) / DOWN (
) button.
2. Shift the cursor to the [DIRECTION] sub menu by pressing RIGHT (
) button.
3. Select the desired sub menu by pressing the UP (
) / DOWN (
) buttons.
4. After selecting the desired sub menu, press the OK button to confirm the setting.
Selecting TIME
Select SLIDE SHOW delay time.
You can select 2 SEC, 3 SEC, 5 SEC, 10 SEC delay time.
1. Select [TIME] in step 6 by pressing the UP (
) / DOWN (
) button.
2. Shift the cursor to the [TIME] sub menu by pressing RIGHT (
) button.
3. Select the desired sub menu by pressing the UP (
) / DOWN (
) buttons.
4. After selecting the desired sub menu, press the OK button to confirm the setting.
SLIDE SHOW
START
DIRECTION
TIME
SELECT
OK SET