Silicon Image silicondvr s1-2k - Manual (Page 18)

© 2008 Silicon Imaging, Inc Page 18
12. Installing Drivers: After rebooting the computer, go into \Program Files\Pleora Technologies
Inc\Ethernet Bus\Binaries\ and launch the EbDriverTool.exe.
13. Once inside the EbDriverTool, you should see the active NIC on the computer available for
installing the eBUS drivers on for use with SiliconDVR. It should be listed as “NIC Driver” under
the “Driver” field.
14. Click on the Intel Pro 1000 NIC that will be used with SiliconDVR, and then click on the
“Configure” button.
15. Inside the configuration window, choose the “GigE Link High-Performance IP Device
Driver” choice.