Sharp AL-1661CS - Manual (Page 38)

34
INITIAL SETTINGS
When a communication error occurs
You can select the interval between recall attempts when a communication error occurs. An interval from 0 to 15
minutes can be selected. If "00" is selected, the machine will not make any recall attempts.
1 Press the [MENU] key.
2 Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
3 Press the [ ] key ( ) or [ ] key ( )
until "11:RECALL INT. ERR" appears,
and then press the [ENTER] key.
4 Press the numeric keys to select the
recall interval.
Enter the recall interval
("00" to "15").
5 Press the [ENTER] key.
6 Press the [CLEAR ALL] key ( ).
Press the [CLEAR ALL]
key (
) to exit.
"4:USER PROGRAM"
Selection
"11:RECALL INT. ERR"
Selection