Printing transaction reports – Sharp AL-1661CS User Manual
Page 92
88
TROUBLESHOOTING
PRINTING TRANSACTION REPORTS
The machine can be set to print a transaction report after each transmission, reception, and/or error. The printing
condition can be selected separately for three types of transaction reports: "TRANSMISSION LIST", "BROADCAST
LIST", and "RECEPTION LIST". For each type of report, select one of the following printing conditions:
"ALWAYS PRINT"......After each transmission, reception, or error.
"ERROR ONLY".........After an error only.
"NEVER PRINT" ........Never prints.
To set the machine to print transaction reports, follow these steps:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "7:PRINT SELECTION" appears,
and then press the [ENTER] key.
4
Press the [
] key (
) or [
] key (
)
to select the type of transaction report
and press the [ENTER] key.
The selections are as
follows:
1:TRANSMISSION
2:BROADCAST
3:RECEPTION
5
Press the [
] key (
) or [
] key (
)
to select the printing condition and
press the [ENTER] key.
The selections are as
follows:
1:ALWAYS PRINT
2:ERROR ONLY
3:NEVER PRINT
6
Press the [CLEAR ALL] key (
).
Press the [CLEAR ALL]
key (
) to exit.
"4:USER PROGRAM"
Selection
"7:PRINT SELECTION"
Selection