SRS Labs MR-F20 - Manual (Page 30)

30
Basi
c o
p
erati
o
n
s
MR-F20 Series
4
Press the button to select the desired item, then
press the OK/EQ button.
The setting menu screen appears.
5
Press the button to select the desired setting, then press the OK/EQ
button.
To go back to the previous level screen: Press the button.
To finish operating menu
Press and hold the button.
Note
After selecting the desired setting in step 5, be sure to press the OK/EQ button. If you go back to the
previous level screen without doing so, your selection will not be set.
MRF20_E.book Page 30 Tuesday, August 16, 2005 12:47 PM