SRS Labs MR-F20 - Manual (Page 54)

54
Li
s
te
n
in
g t
o
FM
r
a
di
o
MR-F20 Series
Storing frequencies
Storing frequencies manually
1
Receive the desired frequency, then press the button.
2
Press the button to select “Save Preset,” then press the OK/EQ
button.
3
Press the button to select the registry number (P1 to P20), then
press the OK/EQ button.
The frequency is stored.
Storing frequencies automatically
1
Press the button while the receiving screen is displayed.
2
Press the button to select “Auto Preset,” then press the OK/EQ
button.
3
Press the button to select “On,” then press the OK/EQ button.
The receivable frequency is stored automatically.
Tip
When “Change Mode” is set to “Manual,” the current frequency can be stored by pressing the OK/EQ
button while receiving FM radio.
Note
If “Auto Preset” is set to “On,” frequency information previously registered will be deleted.
MRF20_E.book Page 54 Tuesday, August 16, 2005 12:47 PM