SRS Labs MR-F20 - Manual (Page 71)

71
Add
it
iona
l in
fo
rm
a
tion
MR-F20 Series
How to remove the battery
1
Press and hold the button to turn off your m:robe if it is turned on.
2
Pry the front panel open from the top of the case, then lift and remove it.
If it is difficult to remove the front panel, grasp the panel firmly and pry up from one end.
3
Loosen the two screws on either side of the connector using a
screwdriver, then remove the connector cover.
MRF20_E.book Page 71 Tuesday, August 16, 2005 12:47 PM