SRS Labs MR-F20 - Manual (Page 47)

47
Reco
rd
in
g
MR-F20 Series
1
Connect the line-in cable to your m:robe and the external audio device.
2
Press the button while the playback screen is displayed.
3
Press the button to select “Record,” then press the OK/EQ button.
4
Press the button to select “Source,” then press the OK/EQ button.
5
Press the button to select “Line In,” then press the OK/EQ button.
6
In playback stop mode, play the external audio device, then press and
hold the
button.
Recording starts.
To pause/resume recording
Press the button.
Recording over Line-in connection
To the audio (Line-out) jack of
an external audio device
MRF20_E.book Page 47 Tuesday, August 16, 2005 12:47 PM